Fenner Poly-F V Belts >> Wrapped Belts
CLASSICAL WRAPPED V-BELTS
· Reliable tensioning capacity
· Suitable for V-Flat drives
| Section | Inside Length Li (inches) |
| A | 18-200 |
| B | 20-500 |
| C | 32-500 |
| D | 75-658 |
| E | 180-660 |
Download PDF for Product Range
Fractional Horse Power Belts (FHP)
· Specially compounded base for good flex fatigue resistance
· Polychloroprene rubberized poly cotton jacketing fabric
· HMLS polyester cord gives low stretch and better flexibility
· Oil / heat resistant antistatic
Range
2000 Series
2170 (17 inches) - 2664 (66.4 inches)
Download PDF for Product range
AGRICULTURAL BELTS
· Hexagonal Belts for Rice Mills & Jute Mills
· Q & R-Section Belts for Harvestor Combines
· Banded Belts for Class Combines (3JB81)
Hexagonal belts
| Section | Inside Length |
| Li(inches) | |
| AA | 78-150 |
| BB | 78-200 |
| CC | 78-200 |
Harvestor Combine Belts
| Section | Length(mm) |
| R | 1825 - 3175 |
Download PDF for Product range
CERAMIC BELTS
V-Crested Belts
· Pentagon shaped profile provides a rough surface where tiles are
supported on the top edge
· Provides with hard and rough surface texture to improve life
| Section | Inside Length(mm) |
| Li(inches) | |
| B | 85 - 210 |
| C | 80 - 210 |
Anti-abrasive Flat Top Profile Belts
· Very long lengths above 500”
· 3mm or 5mm Cushioning top rubber flat to protect the belt from
damage while carrying the tiles
Honey Comb Profile Belts
· Pimple-top surface to give grip to the tiles while carrying
and protect belt from damage
| Section | Inside Length(mm) |
| Li(inches) | |
| A | 18 - 200 |
| B | 20 - 500 |
| C | 32 - 500 |
SPACE SAVER WEDGE BELTS
· Higher power transmission
· Overcome difficulties like shaft overhung, large guards
and Pulleys and thus enhance bearing life
| Section Wedge |
Pitch Length |
| Lp(mm) | |
| SPZ | 500-4500 |
| SPA | 500-7000 |
| SPB | 600-12500 |
| SPC | 1400-17500 |
| Section Narrow V |
Effective Length |
| Li(inches) | |
| 3V | 20-177 |
| 5V | 24-490 |
| 8V | 98-500 |
Download PDF for Product Range
BANDED BELTS
· Ideal for drives where pulsating loads are present
· The top cross cord layer protects the belt from external damage
| Section | Pitch Length Lp(mm) |
| SPZ | 500 - 4500 |
| SPA | 500 - 7000 |
| SPB | 600 - 12500 |
| SPC | 1400 - 17500 |
| Li: Inside Length Le: Effective Length Lp: Pitch Length | |||||
| Section |
Size Range | Belt Width (mm) |
Thickness (mm) |
Pitch (mm) |
Max No |
| A | 42"-150" | 15.90 X N | 11.0 | 15.90 | 6 |
| B | 42"-173" | 19.30 X N | 13.5 | 19.30 | 6 |
| B | 174"-598" | 19.30 X N | 13.5 | 19.30 | 5 |
| C | 62"-120" | 25.55 X N | 17.5 | 25.55 | 4 |
| C | 121"-598" | 25.55 X N | 17.5 | 25.55 | 5 |
| 3V | 420-1500 | 10.30 X N | 10.50 | 10.30 | 6 |
| 5V | 700-1750 | 17.50 X N | 16.00 | 17.50 | 6 |
| 5V | 1760-5980 | 17.50 X N | 16.00 | 17.50 | 5 |
| 8V | 1000-5980 | 28.58 X N | 26.50 | 28.58 | 5 |
| SPZ | 1270-1700 MM | 12.00 X N | 10.50 | 12.00 | 9 |
| SPC | 2500-15200 MM | 25.55 X N | 16.00 | 25.55 | 5 |
Download PDF for Product range